Manufacturer specifications
| Product | Nozzle temperature | Bed temperature | Nominal diameter | Evidence |
|---|---|---|---|---|
| Bambu Lab PLA Basic | 190–230°C | 35–45°C | 1.75 mm | Manufacturer page ↗ |
| Polymaker PolyLite PLA | 190–230°C | 25–60°C | 1.75 mm | Manufacturer page ↗ |
| ELEGOO Rapid PLA Plus | 200–230°C | 35–65°C | 1.75 mm | Manufacturer page ↗ |
Published manufacturer ranges checked 2026-11-11. These are general parameters, not personally measured print results. Compatibility, print profiles, and build surfaces need separate verification.
One controlled test protocol
The following settings are a proposed starting point because their temperatures fall within the published ranges for all three products. They have not been tested on your equipment.
Before a supervised test, confirm settings against each filament, build plate, slicer profile, and printer. The same model and selected settings do not ensure identical physical outcomes.
Actual printed-sample photographs
Bambu Lab PLA Basic
Print photo: unavailable
Print duration: not measured
Consumed material: not measured
Material cost: not verified
Polymaker PolyLite PLA
Print photo: unavailable
Print duration: not measured
Consumed material: not measured
Material cost: not verified
ELEGOO Rapid PLA Plus
Print photo: unavailable
Print duration: not measured
Consumed material: not measured
Material cost: not verified
Product marketing images are not evidence of a controlled print. We do not reproduce other people's print photographs without a suitable license or permission.
Print time and material cost
Actual print time comes from the sliced model or printer log. Exact material cost requires the grams of filament consumed and the actual paid price per kilogram.
For a hypothetical 20-gram print at $20 per kilogram, the filament-only cost would be $0.40. This is a formula example, not a measured result or a price quote.
Use the adjustable printing cost calculator →
Independent testing research
A separate published comparison describes fixed-settings testing on a Bambu Lab A1. Its products and printer are not identical to this proposed three-brand P1S test. Its photographs and results belong to the original publisher and are not reproduced here.
Automated review, human approval
GitHub checks official source reachability weekly and prepares a review request. Publication and any future use of licensed images require explicit approval. The automation does not fabricate hands-on testing.