Manufacturer specifications reviewed November 12, 2026. No equipment in this guide has been independently benchmarked by Print Compare Lab. No purchase links on this page are affiliate tracking links.
The decision in one minute
- Mostly small indoor prints: research the Neptune 4 Pro. Its 225 × 225 mm build plate covers many desk accessories and small parts.
- Large cosplay pieces and batches: start with Neptune 4 Plus. The 320 × 320 × 385 mm build volume is larger in every dimension than the other two models here.
- Enclosure and optional multicolor expansion: compare the Centauri Carbon 2. Its enclosed CoreXY configuration is different from the open-frame Neptune machines. CANVAS multicolor hardware is not included with every configuration.
These are research starting points, not rankings. Build size, maintenance access, room conditions, slicer workflow and delivered cost determine the right fit.
Specification comparison
| Specification | Neptune 4 Pro | Neptune 4 Plus | Centauri Carbon 2 |
|---|---|---|---|
| Build volume | 225 × 225 × 265 mm | 320 × 320 × 385 mm | 256 × 256 × 256 mm |
| Motion and frame | Open-frame, moving-bed FDM | Open-frame, moving-bed FDM | Enclosed CoreXY FDM |
| Advertised max nozzle temp. | 300°C | 300°C | 350°C |
| Bed calibration | 121-point auto bed leveling | 121-point auto bed leveling | Full-auto calibration |
| File transfer | LAN, USB | Wi-Fi, LAN, USB | Check current product documentation |
| Multicolor hardware | No integrated multicolor system listed | No integrated multicolor system listed | Multicolor upgrade ready; CANVAS sold separately |
| Official source | ELEGOO specifications ↗ | ELEGOO specifications ↗ | ELEGOO specifications ↗ |
Nominal build volume is the maximum advertised workspace, not a promise that every model and material prints edge to edge. Printer revisions, bundles and firmware features can differ.
What the specifications mean for real projects
Neptune 4 Pro
A smaller desktop build area and a segmented heated bed. Research for ordinary PLA and PETG parts when an enclosure is not the primary requirement.
Neptune 4 Plus
The largest build area of these three. Research for tall props, bigger single-piece prints and batches that fit the plate.
Centauri Carbon 2
A different machine design: enclosed CoreXY, higher advertised nozzle temperature and optional multicolor hardware. Confirm material and accessory compatibility before purchase.
Open-frame versus enclosed printers
An open-frame printer leaves the build area exposed to the room. For common PLA work, this can be convenient for access and visibility. Drafts and changing room temperature may make some materials more difficult. An enclosed machine changes the thermal environment, but an enclosure alone does not guarantee successful engineering-filament prints. Check the exact filament profile, nozzle material, ventilation guidance and manufacturer support.
Do not buy based on headline speed alone
ELEGOO advertises high maximum movement speeds for these models. A stated top speed is not the average speed of a finished print. Print time depends on part geometry, extrusion flow, acceleration, layer height, cooling, material and the slicer profile. Compare time estimates using the same model and quality settings rather than comparing marketing numbers.
What to check before ordering
- Measure your largest print: include the brim, orientation and supports in the required X, Y and Z dimensions.
- Check available desk clearance: the moving bed, cable routing, spool and machine height need room beyond the print volume.
- Confirm the exact listing version: ELEGOO distinguishes Neptune 4 Plus Type-C and ribbon-cable variants for some replacement parts.
- Match materials to the machine: an advertised nozzle temperature alone does not establish every filament's suitability.
- Compare delivered cost: consider shipping, replacement nozzles, spare plates, filament and any optional multicolor accessory. We do not display live prices.
- Look for independent evidence: owner reports on first-layer consistency, service access and long-term maintenance are distinct from manufacturer specifications.
Questions buyers ask
Is Neptune 4 Plus automatically better than Neptune 4 Pro?
No. The Plus provides more advertised print volume but requires more physical space. A smaller machine might be sufficient for repeated small parts. Choose the required workspace before comparing features or cost.
Does Centauri Carbon 2 print four colors out of the box?
Not in every listing configuration. ELEGOO describes this model as multicolor-upgrade ready and lists CANVAS separately or in bundles. Verify the exact package contents on the official store.
Which is the fastest in a real print?
We do not know. No controlled side-by-side physical test has been completed for these models on this site. Actual speed requires the same sliced test model, quality target and logging method.
Sources and research status
The specifications and product configurations above were checked against ELEGOO's official Neptune 4 Pro, Neptune 4 Plus and Centauri Carbon 2 listings on November 12, 2026. No printers were supplied for review, no test prints were performed, and no performance scores were assigned.
Next, compare ELEGOO PLA+ and Rapid PLA+ or estimate material costs using our print-cost calculator.